FAQ

Frequently Asked Questions (FAQ)

General Questions

Product Features

Information on dimensions, load capacity, special features during assembly or mounting, etc. can be found with the respective product in our online shop. If you have any questions about our products, special designs, the ordering process, shipping, etc., please do not hesitate to contact us. You can reach us by e-mail or by phone at +49 (0)5731 4962902.

Mounting and Assembly

If our furniture or home accessories require mounting or assembly, the necessary instructions and materials are included. And if you have questions, you can reach us by e-mail or by telephone at +49 (0)5731 4962902.

Care Instruction

All our surfaces are extremely easy to maintain and do not require any special care. For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good.

Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

Solid & Grid Wall Shelf

Product Features

With a stable wall mounting and professional assembly, the wall shelves can be loaded with up to 10 kg – this corresponds to about 30 paperbacks.

Assembly

The Solid & Grid wall shelves are attached to masonry walls (made of stone, concrete blocks, etc.) with wall anchors and screws, which are included in the delivery. When mounting to lightweight walls (include drywall, sheet rock, gypsum board, and wood and wood-based panels), wall anchors suitable for the wall material must be used – these are NOT included. For certain lightweight materials, wall anchors may not be required at all. Detailed mounting instructions are included with each wall shelf. If you have any questions about mounting or if any questions arise in the process, please contact our technical support team at +49(0)5731 4962902.

Please have the following tools ready for the mounting:
– Spirit level
– pencil
– drill/accumulator screwdriver for stone/concrete walls
– 6 mm drill bit (Attention: Choose a drill bit that matches the wall material!)
– hammer
– Phillips screwdriver

Tip: Mount the shelf with the help of a second person.

Detailed mounting instructions are included with each wall shelf.

The height of the front edge is chosen so that it does not interfere with mounting. Nevertheless, it is recommended to be a little careful when screwing the shelf. If you want to be on the safe side, you can protect the upturned front edge by placing a soft cloth under it during assembly.

About the products:

Solid 02 Wall Shelf
Grid 02 Wall Shelf
Solid 03 Wall Shelf
Solid 04 Wall Shelf
Solid 05 Wall Shelf
Solid 06 Wall Shelf

Color and Dimensions

All wall shelves from the Solid & Grid collection are available in four colors: white, light gray, anthracite and pastel green. Remaining stocks in golden yellow and salmon red are still available at some retailers and in our online shop. Our four colors are equivalent to the following RAL color shades:

White: RAL 9010
Light gray: RAL 7035
Anthracite: RAL 7016
Pastel Green: RAL 6019

The Solid & Grid collection includes eight wall shelf models (W x D x H):

Solid 01 Wall Shelf: 50 x 15 x 4 cm
Grid 01 Wall Shelf: 50 x 15 x 4 cm
Solid 02 Wall Shelf: 50 x 8 x 4 cm
Grid 02 Wall Shelf: 50 x 8 x 4 cm
Solid 03 Wall Shelf: 100 x 8 x 4 cm
Solid 04 Wall Shelf: 148 x 8 x 4 cm
Solid 05 Wall Shelf: 50 x 14 x 4 cm
Solid 06 Wall Shelf: 100 x 15 x 4cm

The indication of the height of 4 cm refers to the rear bend on the wall. The upturned front edge is approx. 2.5 cm high.

In principle, we can make metal wall shelves in many different sizes and colors. However, this may only be worthwhile from a certain number of pieces. Please contact us for a special size/color request by email or under +49 (0)5731 4962920 or use our form for customized production.

Care Instruction

All our surfaces are extremely easy to maintain and do not require any special care. For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good.

Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

Solid & Grid Side Table

Product Features

In principle, the Solid & Grid Side Tables can also be used outdoors. However, the durability of garden and balcony furniture depends on weather conditions and usage. Avoid exposing the side tables to rain or other wet conditions (e.g., water accumulation in the pot) on a permanent basis. Also avoid the accumulation of water on the tables and use a soft cloth to wipe dry when necessary. During the winter period, weld & co side tables are best kept in a dry and well-ventilated area. If you have any queries about your specific area of use, please contact us by email or on +49 (0)5731 4962920.

No, the side and coffee tables of the Solid & Grid collection are not designed as seating furniture.

No, all side and coffee tables from the Solid & Grid collection are delivered assembled and can be used immediately.

Yes, all side tables from the Solid & Grid collection are equipped with plastic glides that protect even delicate floors.

Yes, the materials we selected for the Solid & Grid Side Tables – sheet steel and round iron bars – make them heavy enough to stand steady even on high pile carpets.

Color and Dimensions

The Solid & Grid Side Tables are available in black and in white.

The Solid & Grid collection includes five Side Table models (W x D x H):

Solid 01 Side Table: Ø 50 cm, 45 cm high
Grid 01 Side Table: Ø 50 cm, 45 cm high
Solid 02 Side Table: 30 x 40 x 40 cm high
Grid 02 Side Table: 30 x 40 x 40 cm high
Solid 03 Side Table: Ø 40 cm, 40 cm high

In principle, we can make the side tables of the Solid & Grid collection in all colors of the RAL range. However, this may only be worthwhile from a certain number of pieces, because we have to buy the desired color by the bucket.

It is similar with desired sizes: In principle, we can make metal side tables in many different sizes. However, this is usually only worthwhile from a certain number of pieces. Please contact us for special requests by email or under +49 (0)5731 4962920 or use our form for customized production.

Care Instruction

All our surfaces are extremely easy to maintain and do not require any special care.For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents.

Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good.

Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

Oak Key Holder

Product Features

With a stable wall mounting and professional assembly, the key holder can be loaded with up to 5 kg.

Keys whose bit is too thick can be inserted into the front slot with the slimmer back or a key ring.

Assembly

The Oak 01 Key Holder is attached to masonry walls (made of stone, concrete blocks, etc.) with two wall anchors and two screws. When mounting to lightweight walls (include drywall, sheet rock, gypsum board, and wood and wood-based panels), wall anchors are usually not necessary. Wall anchors, screws, and detailed mounting instructions are included with each key holder. If you have any questions about mounting or if any questions arise in the process, please contact our technical support team at +49(0)5731 4962902.

Please have the following tools ready for the mounting at a masonry wall:
– Spirit level
– pencil
– drill/accumulator screwdriver for stone/concrete walls
– 6 mm drill bit (Attention: Choose a drill bit that matches the wall material!)
– hammer
– Phillips screwdriver

Please have the following tools ready for the mounting at a lightweight wall:
– Spirit level
– pencil
– optional: drill/accumulator screwdriver

Detailed mounting instructions are included with each key holder.

Dimensions

We are happy to manufacture custom Oak Key Holder for you. Please contact us by email or at +49 (0)5731 4962920 or use our form for customized production.

Care Instruction

For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good. Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

All our surfaces are extremely easy to maintain and do not require any special care.

If you would like to re-oil your Oak Key Holder after several years of use, feel free to contact us – we will be happy to help and advise you – just get in touch.

Oak Picture Ledge

Product Features

The space for prints, pictures and frames is about 7.5 cm deep. Please keep this dimension in mind when planning your personal gallery, so that your frames stand in a stable position on the picture ledge.

Tip: Take the largest and thickest frame you want to place on the picture ledge and walk to a wall. Place the frame on the floor and lean it against the wall. Push the picture frame up against the wall as steeply as you can. When you have found the point where the frame will not tilt, use a folding rule to measure the distance from the wall to the front edge of the frame (note: measure baseboard as well, if necessary). The result indicates the minimum depth required on the picture ledge.

With a stable wall mounting and professional assembly, the picture ledge can be loaded with up to 20 kg.

Assembly

Yes, the mounting material is included in the delivery.

The Oak 02 Picture Ledge is attached to masonry walls (made of stone, concrete blocks, etc.) with two wall anchors and two screws. When mounting to lightweight walls (include drywall, sheet rock, gypsum board, and wood and wood-based panels), wall anchors are usually not necessary. Wall anchors, screws, and detailed mounting instructions are included with each picture ledge. If you have any questions about mounting or if any questions arise in the process, please contact our technical support team at +49(0)5731 4962902.

Please have the following tools ready for the mounting at a masonry wall:
– Spirit level
– pencil
– drill/accumulator screwdriver for stone/concrete walls
– 6 mm drill bit (Attention: Choose a drill bit that matches the wall material!)
– hammer
– Phillips screwdriver

Tip: Mount the shelf with the help of a second person.

Please have the following tools ready for the mounting at a lightweight wall:
– Spirit level
– pencil
– optional: drill/accumulator screwdriver

Tip: Mount the picture ledge with the help of a second person.

Detailed mounting instructions are included with each picture ledge.

We will be happy to send you new mounting material. Please contact us by e-mail or at +49 (0)5731 4962902.

Dimensions

The Oak Picture Ledge is available in three sizes:

Oak 02 Picture Ledge – Size S: 50 × 7,5 × 4 cm
Oak 02 Picture Ledge – Size M: 100 x 7,5 x 4 cm
Oak 02 Picture Ledge – Size L: 150 x 7,5 x 4 cm

We are happy to manufacture custom Oak Picture Ledge for you. Please contact us by email or at +49 (0)5731 4962920 or use our form for customized production.

Care Instruction

For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good. Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

All our surfaces are extremely easy to maintain and do not require any special care.

If you would like to re-oil your Oak Picture Ledge after several years of use, feel free to contact us – we will be happy to help and advise you – just get in touch.

Oak 01 Wall Shelf

Product Features

With a stable wall mounting and professional assembly, the wall shelf can be loaded with up to 20 kg – this corresponds to about 60 paperbacks.

Assembly

The oak wall shelves are mounted with two shelf brackets. These wall brackets for concealed mounting are included with each shelf, as well as detailed assembly instructions.

Assembly instructions for solid walls
Assembly instructions for lightweight walls

Wall anchors for mounting on a masonry wall are also included in the delivery. Wall anchors and screws for mounting on lightweight walls are NOT included. Please use wall anchors and screws according to the condition of your wall and, if necessary, ask your hardware store for the appropriate mounting material. If you have any questions about the assembly or if questions arise in the process, please contact our technical support at +49(0)5731 4962902.

Each shelf comes with wall brackets for concealed mounting. Anchors for use on a masonry wall are also included in the delivery. Wall anchors and screws for mounting on lightweight walls are NOT included. Please use wall anchors and screws according to the condition of your wall and, if necessary, ask your hardware store for the appropriate mounting material. If you have any questions about the assembly or if questions arise in the process, please contact our technical support at +49(0)5731 4962902.

The oak wall shelves are mounted with two shelf brackets for concealed mounting.

Please have the following tools ready for the mounting at a masonry wall:
– Spirit level
– pencil
– drill/accumulator screwdriver for stone/concrete walls
– 10 mm drill bit (Attention: Choose a drill bit that matches the wall material!)
– hammer
– Phillips screwdriver

Tip: Mount the wall shelf with the help of a second person.

Please have the following tools ready for the mounting at a lightweight wall:
– Spirit level
– pencil
– optional: drill/accumulator screwdriver

Tip: Mount the wall shelf with the help of a second person.

Detailed mounting instructions are included with each wall shelf.

Please note that the wall anchors and screws used to attach the wall brackets for concealed mounting to your lightweight wall are NOT included. Please use wall anchors and screws according to the condition of your wall and, if necessary, ask your hardware store for the appropriate mounting material. If you have any questions about the assembly or if questions arise in the process, please contact our technical support at +49(0)5731 4962902.

We will be happy to send you new mounting material. Please contact us by e-mail or at +49 (0)5731 4962902.

We will be very happy to organize the right service provider for you, who will assemble furniture on site and, if required, also professionally mount it on the wall. Simply write us an email after your purchase in our online store or call us at +49 (0)5731 4962902 and we will clarify which service you need.

Dimensions

The Oak 01 Wall Shelf is available in three sizes:

Oak 01 Wall Shelf – Size S: 90 x 15 x 4 cm
Oak 01 Wall Shelf – Size M: 117 x 15 x 4 cm
Oak 01 Wall Shelf – Size L: 150 x 15 x 4 cm

We are happy to manufacture custom oak wall shelves for you. Please contact us by email or at +49 (0)5731 4962920 or use our form for customized production.

Care Instruction

For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good. Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

All our surfaces are extremely easy to maintain and do not require any special care.

If you would like to re-oil your Oak Wall Shelf after several years of use, feel free to contact us – we will be happy to help and advise you – just get in touch.

Oak 02 Wall Shelf

Product Features

With a stable wall mounting and professional assembly, the wall shelf can be loaded with up to 10 kg.

Assembly

The Oak 02 Wall Shelf is attached to masonry walls (made of stone, concrete blocks, etc.) with two wall anchors and two screws. When mounting to lightweight walls (include drywall, sheet rock, gypsum board, and wood and wood-based panels), wall anchors are usually not necessary. Wall anchors, screws, and detailed mounting instructions are included with each wall shelf. If you have any questions about mounting or if any questions arise in the process, please contact our technical support team at +49(0)5731 4962902.

Please have the following tools ready for the mounting at a masonry wall:
– Spirit level
– pencil
– drill/accumulator screwdriver for stone/concrete walls
– 6 mm drill bit (Attention: Choose a drill bit that matches the wall material!)
– hammer
– Phillips screwdriver

Tip: Mount the shelf with the help of a second person.

Please have the following tools ready for the mounting at a lightweight wall:
– Spirit level
– pencil
– optional: drill/accumulator screwdriver

Tip: Mount the wall shelf with the help of a second person.

Detailed mounting instructions are included with each wall shelf.

We will be very happy to organize the right service provider for you, who will assemble furniture on site and, if required, also professionally mount it on the wall. Simply write us an email after your purchase in our online store or call us at +49 (0)5731 4962902 and we will clarify which service you need.

We will be happy to send you new mounting material. Please contact us by e-mail or at +49 (0)5731 4962902.

Dimensions

The Oak 02 Wall Shelf is available in two sizes:

Oak 02 Wall Shelf – Size S: 50 x 15 x 2 cm
Oak 02 Wall Shelf – Size M: 100 x 15 x 2 cm

We are happy to manufacture custom oak wall shelves for you. Please contact us by email or at +49 (0)5731 4962920 or use our form for customized production.

Care Instruction

For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good. Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

All our surfaces are extremely easy to maintain and do not require any special care.

If you would like to re-oil your Oak Wall Shelf after several years of use, feel free to contact us – we will be happy to help and advise you – just get in touch.

Oak Bench

Product Features

No, the Oak 01 Bench will be delivered in one package by ordinary parcel service. 

Assembly

The Oak 01 Bench is delivered disassembled. Assembly is done in a few simple steps. Detailed assembly instructions are included with each bench. If you have any questions about assembly or if any questions arise during assembly, you can reach our technical support team at +49(0)5731 4962902.

Please have a 4 mm Hexagon socket wrench/ Allen wrench ready for assembling the Oak 01 Bench. Allen wrenches are also known as “Allen key“ or „Hex key“.

The Oak 01 Bench is equipped with adjustable feet. These can be turned in and out to level out unevenness in the floor.

Dimensions

The Oak 01 Bench is available in three sizes:

Oak 01 Bench – Size S: 90 x 40 x 45 cm
Oak 01 Bench – Size M: 117 x 40 x 45 cm
Oak 01 Bench – Size L: 150 x 40 x 45 cm

We are happy to manufacture custom Oak Bench for you. Please contact us by email or at +49 (0)5731 4962920 or use our form for customized production.

Care Instruction

For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good. Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

All our surfaces are extremely easy to maintain and do not require any special care.

If you would like to re-oil your Oak Bench after several years of use, feel free to contact us – we will be happy to help and advise you – just get in touch.

Oak Clothes Rack

Product Features

Yes, the rod of the Oak 01 Clothes Rack is stable enough for any typical use (hanging everything that you would usually put on a clothes rack).

The powder coating we use is very robust. So far, even in the long-term test of the Oak 01 Clothes Rack, no damage to the coating has occurred. However, if damage does occur, please contact us by email or on +49 (0)5731 4962902 and we can replace the crossbar if necessary.

The soft casters we use are suitable for all floors. To be save, we recommend a prior check if any small stones, shards, etc. got caught in the rubber of the casters. This is most likely when the clothes rail is used in the entrance area.

In principle, it is possible to convert the Oak 01 Clothes Rack to an Oak 01 Coat Rack. If you are interested and want to receive guidelines, please contact us by email or at +49 (0)5731 4962902.

No, the Oak 01 Clothes Rack will be delivered in two package by ordinary parcel service.

Assembly

The Oak 01 Clothes Rack is delivered disassembled. Assembly is done in a few simple steps. Detailed assembly instructions are included with each clothes rack. If you have any questions about assembly or if any questions arise during assembly, you can reach our technical support team at +49(0)5731 4962902.

Please have a 4 mm Hexagon socket wrench/ Allen wrench ready for assembling the Oak 01 Clothes Rack. Allen wrenches are also known as “Allen key“ or „Hex key“.

Dimensions

The Oak 01 Clothes Rack is available in three sizes:

Oak 01 Clothes Rack – Size S: 90 x 40 x 160 cm
Oak 01 Clothes Rack – Size M: 117 x 40 x 160 cm
Oak 01 Clothes Rack – Size L: 150 x 40 x 160 cm

We are happy to manufacture custom Oak Clothes Rack for you. Please contact us by email or at +49 (0)5731 4962920 or use our form for customized production.

Care Instruction

For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good. Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

All our surfaces are extremely easy to maintain and do not require any special care.

If you would like to re-oil your Oak Clothes Rack after several years of use, feel free to contact us – we will be happy to help and advise you – just get in touch.

Oak Coat Rack

Product Features

Yes, the wooden part of the Oak 01 Coat Rack can be used as a seat. It was specifically designed for that purpose. The seat height is 45 cm.

Yes, the rod of the Oak 01 Coat Rack is stable enough for any typical use (hanging everything that you would usually put on a coat rack).

The powder coating we use is very robust. So far, even in the long-term test of the Oak 01 Coat Rack, no damage to the coating has occurred. However, if damage does occur, please contact us by email or on +49 (0)5731 4962902 and we can replace the crossbar if necessary.

In principle, it is possible to convert the Oak 01 Coat Rack to an Oak 01 Clothes Rack. If you are interested and want to receive guidelines, please contact us by email or at +49 (0)5731 4962902.

No, the Oak 01 Coat Rack will be delivered in two packages by ordinary parcel service.

Assembly

The Oak 01 Coat Rack is delivered disassembled. Assembly is done in a few simple steps. Detailed assembly instructions are included with each coat rack.

If you have any questions about assembly or if any questions arise during assembly, you can reach our technical support team at +49(0)5731 4962902.

Please have a 4 mm Hexagon socket wrench/ Allen wrench ready for assembling the Oak 01 Coat Rack. Allen wrenches are also known as “Allen key“ or “Hex key“.

The Oak 01 Coat Rack is equipped with adjustable feet. These can be turned in and out to level out unevenness in the floor.

Dimensions

The Oak Coat Rack 01 is available in three sizes:

Oak 01 Coat Rack – Size S: 90 x 40 x 190 cm
Oak 01 Coat Rack – Size M: 117 x 40 x 190 cm
Oak 01 Coat Rack – Size L: 150 x 40 x 190 cm

We are happy to manufacture custom Oak Coat Rack for you. Please contact us by email or at +49 (0)5731 4962920 or use our form for customized production.

Care Instruction

For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good. Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

All our surfaces are extremely easy to maintain and do not require any special care.

If you would like to re-oil your Oak Cloat Rack after several years of use, feel free to contact us – we will be happy to help and advise you – just get in touch.

Oak Side Table

Product Features

No, all side and coffee tables from weld & co are delivered assembled and can be used immediately.

No, the side and coffee tables from weld & co are not designed as seating furniture.

Yes, all side tables from weld & co are equipped with plastic glides that protect even delicate floors.

Yes, the materials we selected for Oak Side Tables – wood and round iron bars – make them heavy enough to stand steady even on high pile carpets.

Dimensions

The Oak 01 Side Table is available in two sizes:

Oak 01 Side Table – Size S: Ø 50 cm, 40 cm high
Oak 01 Side Table – Size M: Ø 50 cm, 45 cm high

We are happy to manufacture custom Oak Side Table for you. Please contact us by email or at +49 (0)5731 4962920 or use our form for customized production.

Care Instruction

For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good. Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

All our surfaces are extremely easy to maintain and do not require any special care.
If you would like to re-oil your Oak Side Table after several years of use, feel free to contact us – we will be happy to help and advise you – just get in touch.

Reclaimed Wood Key Holder

Product Features

With a stable wall mounting and professional assembly, the key holder can be loaded with up to 5 kg.

Keys whose bit is too thick can be inserted into the front slot with the slimmer back or a key ring.

Assembly

The Reclaimed Wood 01 Key Holder is attached to masonry walls (made of stone, concrete blocks, etc.) with two wall anchors and two screws. When mounting to lightweight walls (include drywall, sheet rock, gypsum board, and wood and wood-based panels), wall anchors are usually not necessary. Wall anchors, screws, and detailed mounting instructions are included with each key holder.

If you have any questions about mounting or if any questions arise in the process, please contact our technical support team at +49(0)5731 4962902.

Please have the following tools ready for the mounting at a masonry wall:
– Spirit level
– pencil
– drill/accumulator screwdriver for stone/concrete walls
– 6 mm drill bit (Attention: Choose a drill bit that matches the wall material!)
– hammer
– Phillips screwdriver

Please have the following tools ready for the mounting at a lightweight wall:
– Spirit level
– pencil
– optional: drill/accumulator screwdriver

Detailed mounting instructions are included with each key holder.

Dimensions

We are happy to manufacture custom Reclaimed Wood Key Holder for you. Please contact us by email or at +49 (0)5731 4962920 or use our for customized production.

Care Instruction

For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good. Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

All our surfaces are extremely easy to maintain and do not require any special care.

Reclaimed Wood Picture Ledge

Product Features

The space for prints, pictures and frames is about 7.5 cm deep. Please keep this dimension in mind when planning your personal gallery, so that your frames stand in a stable position on the picture ledge.

Tip: Take the largest and thickest frame you want to place on the picture ledge and walk to a wall. Place the frame on the floor and lean it against the wall. Push the picture frame up against the wall as steeply as you can. When you have found the point where the frame will not tilt, use a folding rule to measure the distance from the wall to the front edge of the frame (note: measure baseboard as well, if necessary). The result indicates the minimum depth required on the picture ledge.

With a stable wall mounting and professional assembly, the picture ledge can be loaded with up to 20 kg.

For our Reclaimed Wood Collection, we use only naturally aged woods. The starting material for all furniture in the collection are wooden planks, which were originally used as spacers in wood drying. In manual work weld & co prepares the woods. You can learn more about our material here.

Assembly

The Reclaimed Wood Picture Ledge is attached to masonry walls (made of stone, concrete blocks, etc.) with two wall anchors and two screws. When mounting to lightweight walls (include drywall, sheet rock, gypsum board, and wood and wood-based panels), wall anchors are usually not necessary. Wall anchors, screws, and detailed mounting instructions are included with each picture ledge.
Assembly instruction Reclaimed Wood 01 Picture Ledge
Assembly instruction Reclaimed Wood 02 Picture Ledge

If you have any questions about mounting or if any questions arise in the process, please contact our technical support team at +49(0)5731 4962902.

Each shelf comes with wall brackets for concealed mounting. Anchors for use on a masonry wall are also included in the delivery. Wall anchors and screws for mounting on lightweight walls are NOT included. Please use wall anchors and screws according to the condition of your wall and, if necessary, ask your hardware store for the appropriate mounting material.

If you have any questions about the assembly or if questions arise in the process, please contact our technical support at +49(0)5731 4962902.

Please have the following tools ready for the mounting at a masonry wall:
– Spirit level
– pencil
– drill/accumulator screwdriver for stone/concrete walls
– 6 mm drill bit (Attention: Choose a drill bit that matches the wall material!)
– hammer
– Phillips screwdriver

Tip: Mount the shelf with the help of a second person.

Please have the following tools ready for the mounting at a lightweight wall:
– Spirit level
– pencil
– optional: drill/accumulator screwdriver

Tip: Mount the picture ledge with the help of a second person.

We will be happy to send you new mounting material. Please contact us by e-mail or at +49 (0)5731 4962902.

Dimensions

The Reclaimed Wood Picture Ledge is available in two types:
Reclaimed Wood 01 Picture Ledge
Reclaimed Wood 02 Picture Ledge

Reclaimed Wood 01 Picture Ledge is available in three sizes:
– Reclaimed Wood 01 Picture Ledge – Size S: 50 x 7 x 4 cm
– Reclaimed Wood 01 Picture Ledge – Size M: 100 x 7 x 4 cm
– Reclaimed Wood 01 Picture Ledge – Size L: 150 x 7 x 4c m

Reclaimed Wood 02 Picture Ledge is available in three sizes:
– Reclaimed Wood 02 Picture Ledge – Size S: 50 x 7,5 x 6 cm
– Reclaimed Wood 02 Picture Ledge – Size M: 100 x 7,5 x 6 cm
– Reclaimed Wood 02 Picture Ledge – Size L: 150 x 7,5 x 6 cm

We are happy to manufacture custom reclaimed wood picture deges for you. Please contact us by email or at +49 (0)5731 4962920 or use our form for customized production.

Care Instruction

For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good. Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

All our surfaces are extremely easy to maintain and do not require any special care.

Reclaimed Wood Wall Shelf

Product Features

For our Reclaimed Wood Collection, we use only naturally aged woods. The starting material for all furniture in the collection are wooden planks, which were originally used as spacers in wood drying. In manual work weld & co prepares the woods. You can learn more about our material here.

With a stable wall mounting and professional assembly, the wall shelf can be loaded with up to 20 kg – this corresponds to about 60 paperbacks.

Assembly

Please note that the wall anchors and screws used to attach the wall brackets for concealed mounting to your lightweight wall are NOT included. Please use wall anchors and screws according to the condition of your wall and, if necessary, ask your hardware store for the appropriate mounting material.

If you have any questions about the assembly or if questions arise in the process, please contact our technical support at +49(0)5731 4962902.

The wall shelves made of reclaimed wood are mounted with two shelf brackets. These wall brackets for concealed mounting are included with each shelf, as well as detailed assembly instructions.

Assembly instructions for solid walls
Assembly instructions for lightweight walls

Wall anchors for mounting on a masonry wall are also included in the delivery. Wall anchors and screws for mounting on lightweight walls are NOT included. Please use wall anchors and screws according to the condition of your wall and, if necessary, ask your hardware store for the appropriate mounting material.
If you have any questions about the assembly or if questions arise in the process, please contact our technical support at +49(0)5731 4962902.

The oak wall shelves are mounted with two wall brackets for concealed mounting.

Please have the following tools ready for the mounting at a masonry wall:
– Spirit level
– pencil
– drill/accumulator screwdriver for stone/concrete walls
– 10 mm drill bit (Attention: Choose a drill bit that matches the wall material!)
– hammer
– Phillips screwdriver

Tip: Mount the wall shelf with the help of a second person.

Please have the following tools ready for the mounting at a lightweight wall:
– Spirit level
– pencil
– optional: drill/accumulator screwdriver

Tip: Mount the wall shelf with the help of a second person.

Detailed mounting instructions are included with each wall shelf.

Each shelf comes with wall brackets for concealed mounting. Anchors for use on a masonry wall are also included in the delivery. Wall anchors and screws for mounting on lightweight walls are NOT included. Please use wall anchors and screws according to the condition of your wall and, if necessary, ask your hardware store for the appropriate mounting material.

If you have any questions about the assembly or if questions arise in the process, please contact our technical support at +49(0)5731 4962902.

We will be happy to send you new mounting material. Please contact us by e-mail or at +49 (0)5731 4962902.

Dimensions

The Reclaimed Wood 01 Wall Shelf is available in three sizes:

Reclaimed Wood 01 Wall Shelf – Size S: 90 x 15 x 6 cm
Reclaimed Wood 01 Wall Shelf – Size M: 117 x 15 x 6 cm
Reclaimed Wood 01 Wall Shelf – Size L: 150 x 15 x 6 cm
 

We are happy to manufacture custom reclaimed wood wall shelves for you. Please contact us by email or at +49 (0)5731 4962920 or use our form for customized production.

Care Instruction

For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good. Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

All our surfaces are extremely easy to maintain and do not require any special care.

Reclaimed Wood Bench

Product Features

For our Reclaimed Wood Collection, we use only naturally aged woods. The starting material for all furniture in the collection are wooden planks, which were originally used as spacers in wood drying. In manual work weld & co prepares the woods. You can learn more about our material here.

No, the Reclaimed Wood 01 bench will be delivered in one package by ordinary parcel service.

Assembly

The Reclaimed Wood 01 Bench is delivered disassembled. Assembly is done in a few simple steps. Detailed assembly instructions are included with each bench.

If you have any questions about assembly or if any questions arise during assembly, you can reach our technical support team at +49(0)5731 4962902.

Please have a 4 mm Hexagon socket wrench/ Allen wrench ready for assembling the Reclaimed Wood 01 Bench. Allen wrenches are also known as “Allen key“ or „Hex key“.

The Reclaimed Wood 01 Bench is equipped with adjustable feet. These can be turned in and out to level out unevenness in the floor.

Dimensions

he Reclaimed Wood 01 Bench is available in three sizes:

Reclaimed Wood 01 Bench – Size S: 90 x 40 x 45 cm
Reclaimed Wood 01 Bench – Size M: 117 x 40 x 45 cm
Reclaimed Wood 01 Bench – Size L: 150 x 40 x 45 cm

We are happy to manufacture custom Reclaimed Wood Bench for you. Please contact us by email or at +49 (0)5731 4962920 or use our form for customized production.

Care Instruction

For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good. Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

All our surfaces are extremely easy to maintain and do not require any special care.

Reclaimed Wood Clothes Rack

Product Features

For our Reclaimed Wood Collection, we use only naturally aged woods. The starting material for all furniture in the collection are wooden planks, which were originally used as spacers in wood drying. In manual work weld & co prepares the woods. You can learn more about our material here.

Yes, the rail of the Reclaimed Wood 01 Clothes Rack is stable enough for any typical use (hanging everything that you would usually put on a clothes rack).

The powder coating we use is very robust. So far, even in the long-term test of the Reclaimed Wood 01 Clothes Rack, no damage to the coating has occurred. However, if damage does occur, please contact us by email or on +49 (0)5731 4962902 and we can replace the crossbar if necessary.

The soft casters we use are suitable for all floors. To be save, we recommend a prior check if any small stones, shards, etc. got caught in the rubber of the casters. This is most likely when the clothes rail is used in the entrance area.

In principle, it is possible to convert the Reclaimed Wood 01 Clothes Rack to an Reclaimed Wood 01 Coat Rack. If you are interested and want to receive guidelines, please contact us by email or at +49 (0)5731 4962902.

No, the Reclaimed Wood 01 Clothes Rack will be delivered in two packages by ordinary parcel service.

Assembly

The Reclaimed Wood 01 Clothes Rack is delivered disassembled. Assembly is done in a few simple steps. Detailed assembly instructions are included with each bench. If you have any questions about assembly or if any questions arise during assembly, you can reach our technical support team at +49(0)5731 4962902.

Please have a 4 mm Hexagon socket wrench/ Allen wrench ready for assembling the Reclaimed Wood 01 Clothes Rack. Allen wrenches are also known as “Allen key“ or „Hex key“.

Dimensions

The Reclaimed Wood 01 Clothes Rack is available in three sizes:

Reclaimed Wood 01 Clothes Rack – Size S: 90 x 40 x 160 cm
Reclaimed Wood 01 Clothes Rack – Size M: 117 x 40 x 160 cm
Reclaimed Wood 01 Clothes Rack – Size L: 150 x 40 x 160 cm

We are happy to manufacture custom Reclaimed Wood Clothes Rack for you. Please contact us by email or at +49 (0)5731 4962920 or use our form for customized production.

Care Instruction

For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good. Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

All our surfaces are extremely easy to maintain and do not require any special care.

Reclaimed Wood Coat Rack

Product Features

For our Reclaimed Wood Collection, we use only naturally aged woods. The starting material for all furniture in the collection are wooden planks, which were originally used as spacers in wood drying. In manual work weld & co prepares the woods. You can learn more about our material here.

Yes, the wooden part of the Reclaimed Wood 01 Coat Rack can be used as a seat. It was specifically designed for that purpose. The seat height is 45 cm.

Yes, the rod of the Reclaimed Wood 01 Coat Rack is stable enough for any typical use (hanging everything that you would usually put on a coat rack).

The powder coating we use is very robust. So far, even in the long-term test of the Reclaimed Wood 01 Coat Rack, no damage to the coating has occurred. However, if damage does occur, please contact us by email or on +49 (0)5731 4962902 and we can replace the crossbar if necessary.

In principle, it is possible to convert the Reclaimed Wood 01 Coat Rack to an Reclaimed Wood 01 Clothes Rack. If you are interested and want to receive guidelines, please contact us by email or at +49 (0)5731 4962902.

No, the Reclaimed Wood 01 Coat Rack will be delivered in two packages by ordinary parcel service.

Assembly

The Reclaimed Wood 01 Coat Rack is delivered disassembled. Assembly is done in a few simple steps. Detailed assembly instructions are included with each bench. If you have any questions about assembly or if any questions arise during assembly, you can reach our technical support team at +49(0)5731 4962902.

Please have a 4 mm Hexagon socket wrench/ Allen wrench ready for assembling the Reclaimed Wood 01 Coat Rack. Allen wrenches are also known as “Allen key“ or “Hex key“.

The Wood 01 Coat Rack is equipped with adjustable feet. These can be turned in and out to level out unevenness in the floor.

Dimensions

The Reclaimed Wood 01 Coat Rack is available in three sizes:

Reclaimed Wood 01 Coat Rack – Size S: 90 x 40 x 190 cm
Reclaimed Wood 01 Coat Rack – Size M: 117 x 40 x 190 cm
Reclaimed Wood 01 Coat Rack – Size L: 150 x 40 x 190 cm

We are happy to manufacture custom Reclaimed Wood Coat Rack for you. Please contact us by email or at +49 (0)5731 4962920 or use our form for customized production.

Care Instruction

For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good. Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

All our surfaces are extremely easy to maintain and do not require any special care.

Walnut Key Holder

Product Features

With a stable wall mounting and professional assembly, the key holder can be loaded with up to 5 kg.

Keys whose bit is too thick can be inserted into the front slot with the slimmer back or a key ring.

Assembly

The Walnut 01 Key Holder is attached to masonry walls (made of stone, concrete blocks, etc.) with two wall anchors and two screws. When mounting to lightweight walls (include drywall, sheet rock, gypsum board, and wood and wood-based panels), wall anchors are usually not necessary. Wall anchors, screws, and detailed mounting instructions are included with each key holder. If you have any questions about mounting or if any questions arise in the process, please contact our technical support team at +49(0)5731 4962902.

Please have the following tools ready for the mounting at a masonry wall:
– Spirit level
– pencil
– drill/accumulator screwdriver for stone/concrete walls
– 6 mm drill bit (Attention: Choose a drill bit that matches the wall material!)
– hammer
– Phillips screwdriver

Please have the following tools ready for the mounting at a lightweight wall:
– Spirit level
– pencil
– optional: drill/accumulator screwdriver

Detailed mounting instructions are included with each key holder.

Dimensions

We are happy to manufacture custom Walnut Key Holder for you. Please contact us by email or at +49 (0)5731 4962920 or use our form for customized production.

Care Instruction

For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good. Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

All our surfaces are extremely easy to maintain and do not require any special care. If you would like to re-oil your Walnut Key Holder after several years of use, feel free to contact us – we will be happy to help and advise you – just get in touch.

Walnut Picture Ledge

Product Features

The space for prints, pictures and frames is about 7.5 cm deep. Please keep this dimension in mind when planning your personal gallery, so that your frames stand in a stable position on the picture ledge. Tip: Take the largest and thickest frame you want to place on the picture ledge and walk to a wall. Place the frame on the floor and lean it against the wall. Push the picture frame up against the wall as steeply as you can. When you have found the point where the frame will not tilt, use a folding rule to measure the distance from the wall to the front edge of the frame (note: measure baseboard as well, if necessary). The result indicates the minimum depth required on the picture ledge.

With a stable wall mounting and professional assembly, the picture ledge can be loaded with up to 20 kg.

Assembly

Yes, the mounting material is included in the delivery.

The Walnut 02 Picture Ledge is attached to masonry walls (made of stone, concrete blocks, etc.) with two wall anchors and two screws. When mounting to lightweight walls (include drywall, sheet rock, gypsum board, and wood and wood-based panels), wall anchors are usually not necessary. Wall anchors, screws, and detailed mounting instructions are included with each picture ledge. If you have any questions about mounting or if any questions arise in the process, please contact our technical support team at +49(0)5731 4962902.

Please have the following tools ready for the mounting at a masonry wall:
– Spirit level
– pencil
– drill/accumulator screwdriver for stone/concrete walls
– 6 mm drill bit (Attention: Choose a drill bit that matches the wall material!)
– hammer
– Phillips screwdriver

Tip: Mount the shelf with the help of a second person.

Please have the following tools ready for the mounting at a lightweight wall:
– Spirit level
– pencil
– optional: drill/accumulator screwdriver

Tip: Mount the picture ledge with the help of a second person.

Detailed mounting instructions are included with each picture ledge.

We will be happy to send you new mounting material. Please contact us by e-mail or at +49 (0)5731 4962902.

Dimensions

The Walnut 02 Picture Ledge is available in three sizes:
Walnut 02 Picture Ledge – Size S: 50 × 7,5 × 4 cm
Walnut 02 Picture Ledge – Size M: 100 x 7,5 x 4 cm
Walnut 02 Picture Ledge – Size L: 150 x 7,5 x 4 cm

We are happy to manufacture custom Walnut Picture Ledge for you. Please contact us by email or at +49 (0)5731 4962920 or use our form for customized production.

Care Instruction

For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good. Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

All our surfaces are extremely easy to maintain and do not require any special care. If you would like to re-oil your Walnut Picture Ledge after several years of use, feel free to contact us – we will be happy to help and advise you – just get in touch.

Walnut 01 Wall Shelf

Product Features

With a stable wall mounting and professional assembly, the wall shelf can be loaded with up to 20 kg – this corresponds to about 60 paperbacks.

Assembly

The Walnut wall shelves are mounted with two shelf brackets. These wall brackets for concealed mounting are included with each shelf, as well as detailed assembly instructions.

Assembly instructions for solid walls
Assembly instructions for lightweight walls

Wall anchors for mounting on a masonry wall are also included in the delivery. Wall anchors and screws for mounting on lightweight walls are NOT included. Please use wall anchors and screws according to the condition of your wall and, if necessary, ask your hardware store for the appropriate mounting material.
If you have any questions about the assembly or if questions arise in the process, please contact our technical support at +49(0)5731 4962902.

Each shelf comes with wall brackets for concealed mounting. Anchors for use on a masonry wall are also included in the delivery. Wall anchors and screws for mounting on lightweight walls are NOT included. Please use wall anchors and screws according to the condition of your wall and, if necessary, ask your hardware store for the appropriate mounting material. If you have any questions about the assembly or if questions arise in the process, please contact our technical support at +49(0)5731 4962902.

The Walnut wall shelves are mounted with two shelf brackets for concealed mounting.

Please have the following tools ready for the mounting at a masonry wall:
– Spirit level
– pencil
– drill/accumulator screwdriver for stone/concrete walls
– 10 mm drill bit (Attention: Choose a drill bit that matches the wall material!)
– hammer
– Phillips screwdriver

Tip: Mount the wall shelf with the help of a second person.

Please have the following tools ready for the mounting at a lightweight wall:
– Spirit level
– pencil
– optional: drill/accumulator screwdriver

Tip: Mount the wall shelf with the help of a second person.

Detailed mounting instructions are included with each wall shelf.

Please note that the wall anchors and screws used to attach the wall brackets for concealed mounting to your lightweight wall are NOT included. Please use wall anchors and screws according to the condition of your wall and, if necessary, ask your hardware store for the appropriate mounting material. If you have any questions about the assembly or if questions arise in the process, please contact our technical support at +49(0)5731 4962902.

We will be happy to send you new mounting material. Please contact us by e-mail or at +49 (0)5731 4962902.

We will be very happy to organize the right service provider for you, who will assemble furniture on site and, if required, also professionally mount it on the wall. Simply write us an email after your purchase in our online store or call us at +49 (0)5731 4962902 and we will clarify which service you need.

Dimensions

The Walnut 01 Wall Shelf is available in three sizes:
Walnut 01 Wall Shelf – Size S: 90 x 15 x 4 cm
Walnut 01 Wall Shelf – Size M: 117 x 15 x 4 cm
Walnut 01 Wall Shelf – Size L: 150 x 15 x 4 cm

We are happy to manufacture custom Walnut wall shelves for you. Please contact us by email or at +49 (0)5731 4962920 or use our form for customized production.

Care Instruction

For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good. Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

All our surfaces are extremely easy to maintain and do not require any special care. If you would like to re-oil your Walnut Wall Shelf after several years of use, feel free to contact us – we will be happy to help and advise you – just get in touch.

Walnut 02 Wall Shelf

Product Features

With a stable wall mounting and professional assembly, the wall shelf can be loaded with up to 10 kg.

Assembly

The Walnut 02 Wall Shelf is attached to masonry walls (made of stone, concrete blocks, etc.) with two wall anchors and two screws. When mounting to lightweight walls (include drywall, sheet rock, gypsum board, and wood and wood-based panels), wall anchors are usually not necessary. Wall anchors, screws, and detailed mounting instructions are included with each wall shelf. If you have any questions about mounting or if any questions arise in the process, please contact our technical support team at +49(0)5731 4962902.

Please have the following tools ready for the mounting at a masonry wall:
– Spirit level
– pencil
– drill/accumulator screwdriver for stone/concrete walls
– 6 mm drill bit (Attention: Choose a drill bit that matches the wall material!)
– hammer
– Phillips screwdriver

Tip: Mount the shelf with the help of a second person.

Please have the following tools ready for the mounting at a lightweight wall:
– Spirit level
– pencil
– optional: drill/accumulator screwdriver

Tip: Mount the wall shelf with the help of a second person.

Detailed mounting instructions are included with each wall shelf.

We will be very happy to organize the right service provider for you, who will assemble furniture on site and, if required, also professionally mount it on the wall. Simply write us an email after your purchase in our online store or call us at +49 (0)5731 4962902 and we will clarify which service you need.

We will be happy to send you new mounting material. Please contact us by e-mail or at +49 (0)5731 4962902.

Dimensions

The Walnut 02 Wall Shelf is available in two sizes:

Walnut 02 Wall Shelf – Size S: 50 x 15 x 2 cm
Walnut 02 Wall Shelf – Size M: 100 x 15 x 2 cm

We are happy to manufacture custom walnut wall shelves for you. Please contact us by email or at +49 (0)5731 4962920 or use our form for customized production.

Care Instruction

For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good. Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

All our surfaces are extremely easy to maintain and do not require any special care.

Walnut Bench

Product Features

No, the Walnut 01 Bench will be delivered in one package by ordinary parcel service.

Assembly

The Walnut 01 Bench is delivered disassembled. Assembly is done in a few simple steps. Detailed assembly instructions are included with each bench. If you have any questions about assembly or if any questions arise during assembly, you can reach our technical support team at +49(0)5731 4962902.

Please have a 4 mm Hexagon socket wrench/ Allen wrench ready for assembling the Walnut 01 Bench. Allen wrenches are also known as “Allen key“ or „Hex key“.

The Walnut 01 Bench is equipped with adjustable feet. These can be turned in and out to level out unevenness in the floor.

Dimensions

The Walnut 01 Bench is available in three sizes:
Walnut 01 Bench – Size S: 90 x 40 x 45 cm
Walnut 01 Bench – Size M: 117 x 40 x 45 cm
Walnut 01 Bench – Size L: 150 x 40 x 45 cm

We are happy to manufacture custom Walnut Bench for you. Please contact us by email or at +49 (0)5731 4962920 or use our form for customized production.

Care Instruction

For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good. Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

All our surfaces are extremely easy to maintain and do not require any special care. If you would like to re-oil your Walnut Bench after several years of use, feel free to contact us – we will be happy to help and advise you – just get in touch.

Walnut Clothes Rack

Product Features

Yes, the rod of the Walnut 01 Clothes Rack is stable enough for any typical use (hanging everything that you would usually put on a clothes rack).

The powder coating we use is very robust. So far, even in the long-term test of the Walnut 01 Clothes Rack, no damage to the coating has occurred. However, if damage does occur, please contact us by email or on +49 (0)5731 4962902 and we can replace the crossbar if necessary.

The soft casters we use are suitable for all floors. To be save, we recommend a prior check if any small stones, shards, etc. got caught in the rubber of the casters. This is most likely when the clothes rail is used in the entrance area.

In principle, it is possible to convert the Walnut 01 Clothes Rack to an Walnut 01 Coat Rack. If you are interested and want to receive guidelines, please contact us by email or at +49 (0)5731 4962902.

No, the Walnut 01 Clothes Rack will be delivered in two package by ordinary parcel service.

Assembly

The Walnut 01 Clothes Rack is delivered disassembled. Assembly is done in a few simple steps. Detailed assembly instructions are included with each clothes rack. If you have any questions about assembly or if any questions arise during assembly, you can reach our technical support team at +49(0)5731 4962902.

Please have a 4 mm Hexagon socket wrench/ Allen wrench ready for assembling the Walnut 01 Clothes Rack. Allen wrenches are also known as “Allen key“ or „Hex key“.

Dimensions

The Walnut 01 Clothes Rack is available in three sizes:
Walnut 01 Clothes Rack – Size S: 90 x 40 x 160 cm
Walnut 01 Clothes Rack – Size M: 117 x 40 x 160 cm
Walnut 01 Clothes Rack – Size L: 150 x 40 x 160 cm

We are happy to manufacture custom Walnut Clothes Rack for you. Please contact us by email or at +49 (0)5731 4962920 or use our form for customized production.

Care Instruction

For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good. Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

All our surfaces are extremely easy to maintain and do not require any special care. If you would like to re-oil your Walnut Clothes Rack after several years of use, feel free to contact us – we will be happy to help and advise you – just get in touch.

Walnut Coat Rack

Product Features

Yes, the wooden part of the Walnut 01 Coat Rack can be used as a seat. It was specifically designed for that purpose. The seat height is 45 cm.

Yes, the rod of the Walnut 01 Coat Rack is stable enough for any typical use (hanging everything that you would usually put on a coat rack).

The powder coating we use is very robust. So far, even in the long-term test of the Walnut 01 Coat Rack, no damage to the coating has occurred. However, if damage does occur, please contact us by email or on +49 (0)5731 4962902 and we can replace the crossbar if necessary.

In principle, it is possible to convert the Walnut 01 Coat Rack to an Walnut 01 Clothes Rack. If you are interested and want to receive guidelines, please contact us by email or at +49 (0)5731 4962902.

No, the Walnut 01 Coat Rack will be delivered in two packages by ordinary parcel service.

Assembly

The Walnut 01 Coat Rack is delivered disassembled. Assembly is done in a few simple steps. Detailed assembly instructions are included with each coat rack. If you have any questions about assembly or if any questions arise during assembly, you can reach our technical support team at +49(0)5731 4962902.

Please have a 4 mm Hexagon socket wrench/ Allen wrench ready for assembling the Walnut 01 Coat Rack. Allen wrenches are also known as “Allen key“ or “Hex key“.

The Walnut 01 Coat Rack is equipped with adjustable feet. These can be turned in and out to level out unevenness in the floor.

Dimensions

The Walnut Coat Rack 01 is available in three sizes:
Walnut 01 Coat Rack – Size S: 90 x 40 x 190 cm
Walnut 01 Coat Rack – Size M: 117 x 40 x 190 cm
Walnut 01 Coat Rack – Size L: 150 x 40 x 190 cm

We are happy to manufacture custom Walnut Coat Rack for you. Please contact us by email or at +49 (0)5731 4962920 or use our form for customized production.

Care Instruction

For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good. Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

All our surfaces are extremely easy to maintain and do not require any special care. If you would like to re-oil your Walnut Cloat Rack after several years of use, feel free to contact us – we will be happy to help and advise you – just get in touch.

Walnut Side Table

Product Features

No, all side and coffee tables from weld & co are delivered assembled and can be used immediately.

No, the side and coffee tables from weld & co are not designed as seating furniture.

Yes, all side tables from weld & co are equipped with plastic glides that protect even delicate floors.

Yes, the materials we selected for Walnut Side Tables – wood and round iron bars – make them heavy enough to stand steady even on high pile carpets.

Dimensions

The Walnut 01 Side Table is available in two sizes:

Walnut 01 Side Table – Size S: Ø 50 cm, 40 cm high
Walnut 01 Side Table – Size M: Ø 50 cm, 45 cm high

We are happy to manufacture custom Walnut Side Table for you. Please contact us by email or at +49 (0)5731 4962920 or use our form for customized production.

Care Instruction

For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good. Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

All our surfaces are extremely easy to maintain and do not require any special care.
If you would like to re-oil your Walnut Side Table after several years of use, feel free to contact us – we will be happy to help and advise you – just get in touch.