Walnut 01 Key Holder

Walnut 01 Key Holder

95,00 

Share this product

Keys, wallet, (sun-) glasses, smartphone, travel mug – there’s room for everything on the Walnut 01 Key Holder from weld & co, so you’ll never again go out the door without the things you need. The front of this small shelf features a lengthwise slot that can be used to hold keys and keyrings. Another groove on the upper surface of the key holder is a handy place for postcards, important letters, tickets, and much more. All this makes our key holder a practical and versatile addition to your entryway or hall.

The Walnut 01 Key Holder is made from solid walnut wood. The surface its oiled, bringing out the dark, silky hue and fine grain of the wood.

The Walnut 01 Key Holder is mounted on the wall using two screws. You’ll find more information on mounting this product in our assembly instructions.

Do you have questions about our Walnut 01 Key Holder? Please don’t hesitate to contact us.

Material:
Oiled walnut

Dimensions:
30 × 7,5 × 4 cm

Purchase includes:
Key holder,
mounting hardware

Mounting & assembly

Every weld & co home accessory or piece of furniture that has to be assembled or mounted comes with the necessary materials and instructions. If you have any questions about mounting or if any questions arise in the process, please contact our technical support team at +49(0)5731 4962902 or by email.

Care instructions

All our surfaces are extremely easy to maintain and do not require any special care.
For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good.
Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

Frequently Asked Questions (FAQ)

How many kilograms does the Walnut 01 Key Holder support?
With a stable wall mounting and professional assembly, the key holder can be loaded with up to 5 kg.
How do I attach the Walnut 01 key Holder?
The Walnut 01 Key Holder is attached to masonry walls (made of stone, concrete blocks, etc.) with two wall anchors and two screws. When mounting to lightweight walls (include drywall, sheet rock, gypsum board, and wood and wood-based panels), wall anchors are usually not necessary. Wall anchors, screws, and detailed mounting instructions are included with each key holder. If you have any questions about mounting or if any questions arise in the process, please contact our technical support team at +49(0)5731 4962902.
What tools do I need to mount a key holder from the Walnut collection of weld & co?
Please have the following tools ready for the mounting at a masonry wall:
– Spirit level
– pencil
– drill/accumulator screwdriver for stone/concrete walls
– 6 mm drill bit (Attention: Choose a drill bit that matches the wall material!)
– hammer
– Phillips screwdriver

Please have the following tools ready for the mounting at a lightweight wall:
– Spirit level
– pencil
– optional: drill/accumulator screwdriver

Detailed mounting instructions are included with each key holder.

How do thick keys find hold in the key holder?
Keys whose bit is too thick can be inserted into the front slot with the slimmer back or a key ring.

Additional information

Weight 0.75 kg
Dimensions 53 × 18 × 5.5 cm

Matching products...

The most prominent product in the store, which was bought with the highest number - upsell