Reclaimed Wood 01 Key Holder

Schlüsselbrett Altholz 01 von weld & co

Reclaimed Wood 01 Key Holder

85,00 

SKU: SchBA01 Categories: , ,

Share this product

With the Reclaimed Wood 01 Key Holder by weld & co, you’ll always have your keys, wallet, and mobile phone ready and waiting by the door – making you much less likely to forget them.

Keys and keyrings can be inserted into the front slot of this practical shelf. An additional groove on the top of the key holder is the perfect place to keep postcards, letters, and other important papers close at hand. A bulldog clip transforms the Reclaimed Wood 01 Key Holder into a notice board. And there’s also room on top for your water bottle and sunglasses. So the Reclaimed Wood 01 Key Holder isn’t just an attractive accessory for your hall or entryway, but a multi-functional wall shelf as well.

The Reclaimed Wood 01 Key Holder is mounted on the wall using two screws. Information on wall mounting can be found in the mounting instructions.

Do you have questions about the Reclaimed Wood 01 Key Holder?
Then please contact us.

Material:
Unpainted reclaimed wood

Dimensions:
30 × 7,5 × 6 cm

Purchase includes:
Key holder, mounting hardware

Mounting & assembly

Every weld & co home accessory or piece of furniture that has to be assembled or mounted comes with the necessary materials and instructions. If you have any questions about mounting or if any questions arise in the process, please contact our technical support team at +49(0)5731 4962902 or by email.

Care instructions

All our surfaces are extremely easy to maintain and do not require any special care.
For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good.
Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

Frequently Asked Questions (FAQ)

How many kilograms does the Reclaimed Wood 01 Key Holder support?
With a stable wall mounting and professional assembly, the key holder can be loaded with up to 5 kg.
How do I attach the Reclaimed Wood 01 key Holder?
The Reclaimed Wood 01 Key Holder is attached to masonry walls (made of stone, concrete blocks, etc.) with two wall anchors and two screws. When mounting to lightweight walls (include drywall, sheet rock, gypsum board, and wood and wood-based panels), wall anchors are usually not necessary. Wall anchors, screws, and detailed mounting instructions are included with each key holder. If you have any questions about mounting or if any questions arise in the process, please contact our technical support team at +49(0)5731 4962902.
What tools do I need to mount a key holder from the Reclaimed Wood collection of weld & co?
Please have the following tools ready for the mounting at a masonry wall:
– Spirit level
– pencil
– drill/accumulator screwdriver for stone/concrete walls
– 6 mm drill bit (Attention: Choose a drill bit that matches the wall material!)
– hammer
– Phillips screwdriver

Please have the following tools ready for the mounting at a lightweight wall:
– Spirit level
– pencil
– optional: drill/accumulator screwdriver

Detailed mounting instructions are included with each key holder.

How do thick keys find hold in the key holder?
Keys whose bit is too thick can be inserted into the front slot with the slimmer back or a key ring.

Additional information

Weight 0.83 kg
Dimensions 30 × 7.5 × 6 cm

Matching products...

The most prominent product in the store, which was bought with the highest number - upsell