Oak 01 Key Holder

Oak 01 Key Holder

75,00 

SKU: SchBE01 Categories: , ,

Share this product

Keys, wallet, mobile phone – the most important things you need when leaving your home are held ready on the Oak 01 Key Holder by weld & co.

Keys and keyrings can be inserted into the front slot of the small shelf, while the groove on the top side of the key holder can be used to hold postcards, important letters, tickets, and more. Plus you can use bulldog clips to attach notes along the groove. Your sunglasses, coffee cup, water bottle, and all the little things you shouldn’t forget at home can be placed on top of the key holder for you to grab on your way out the door. Making the Oak 01 Key Holder a handy multi-functional wall shelf for your entryway or hall.

The Oak 01 Key Holder is mounted on the wall using two screws.

For additional information on hanging the shelf, please see the mounting instruction.

Do you have questions about the Oak 01 Key Holder?
Then please contact us.

Material:
Oiled oak

Dimensions:
30 × 7,5 × 4 cm

Purchase includes:
Key holder,
mounting hardware

Mounting & assembly

Every weld & co home accessory or piece of furniture that has to be assembled or mounted comes with the necessary materials and instructions. If you have any questions about mounting or if any questions arise in the process, please contact our technical support team at +49(0)5731 4962902 or by email.

Care instructions

All our surfaces are extremely easy to maintain and do not require any special care.
For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good.
Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

Frequently Asked Questions (FAQ)

How many kilograms does the Oak 01 Key Holder support?
With a stable wall mounting and professional assembly, the key holder can be loaded with up to 5 kg.
How do I attach the Oak 01 key Holder?
The Oak 01 Key Holder is attached to masonry walls (made of stone, concrete blocks, etc.) with two wall anchors and two screws. When mounting to lightweight walls (include drywall, sheet rock, gypsum board, and wood and wood-based panels), wall anchors are usually not necessary. Wall anchors, screws, and detailed mounting instructions are included with each key holder. If you have any questions about mounting or if any questions arise in the process, please contact our technical support team at +49(0)5731 4962902.
What tools do I need to mount a key holder from the Oak collection of weld & co?
Please have the following tools ready for the mounting at a masonry wall:
– Spirit level
– pencil
– drill/accumulator screwdriver for stone/concrete walls
– 6 mm drill bit (Attention: Choose a drill bit that matches the wall material!)
– hammer
– Phillips screwdriver

Please have the following tools ready for the mounting at a lightweight wall:
– Spirit level
– pencil
– optional: drill/accumulator screwdriver

Detailed mounting instructions are included with each key holder.

How do thick keys find hold in the key holder?
Keys whose bit is too thick can be inserted into the front slot with the slimmer back or a key ring.

Additional information

Weight 0.73 kg
Dimensions 30 × 7.5 × 4 cm

Matching products...

The most prominent product in the store, which was bought with the highest number - upsell