Oak 02 Wall Mirror

Oak 02 Wall Mirror

229,00 

SKU: WSE02 Categories: , ,

Share this product

The Oak 02 Wall Mirror by weld & co combines a wall-mounted oiled oak ledge and a round mirror. The diameter of the mirror is sized to be inserted into the slot in the wood with no further fastening needed – it is held in place by the solid wood ledge without any visible support.

Our Oak 02 Wall Mirror can create a sense of depth by reflecting the space in small halls and entryways. The mirror also adds a convenient and stylish touch to your living room, bedroom, or dressing room. The combination of solid wood and mirror glass is a real eye-catcher. Mounted in a bathroom or guest bath, the Oak 02 Wall Mirror also shines as an attractive and practical accessory.

The floating oak ledge is 50 cm long and is securely mounted on the wall using two screws. The mirror has a diameter of 50 cm and is designed to be inserted into the slot in the wood ledge.

For additional information on hanging the Oak 02 Wall Mirror, please see the mounting instructions.

Do you have questions about our Oak 02 Wall Mirror? Then please check our FAQ or contact us directly.

Material:
Oiled oak
Mirror

Dimensions:
Ø 50 x 2,5 cm

Purchase includes:
Wall Mirror (Ledge, Mirror),
Mounting hardware

 

Mounting & assembly

Every weld & co home accessory or piece of furniture that has to be assembled or mounted comes with the necessary materials and instructions. If you have any questions about mounting or if any questions arise in the process, please contact our technical support team at +49(0)5731 4962902 or by email.

Care instructions

All our surfaces are extremely easy to maintain and do not require any special care.
For cleaning, please use a feather duster or a soft, slightly damp cloth. If at all necessary, please use mild cleaning agents. Please do not use harsh cleaners, abrasive cleaners or cleaners containing solvents. They will attack the surfaces and do more damage than good.
Please be sure to remove wet stains (for example, water, juice, wine) on wood surfaces as quickly as possible. Strongly staining stains (such as stains of fruits, tea, coffee and red wine) must be removed immediately from all surfaces.

Frequently Asked Questions (FAQ)

Is the Oak 02 Wall Mirror also suitable for the bathroom?
As a general rule, wood does not belong in the wet room and water should not be allowed to stand permanently on wooden surfaces. However, the increased humidity after showering and bathing does not pose a risk to solid wood. The surfaces of furniture and home accessories made of oak, walnut and silver fir from weld & co are oiled. Thus, the wood is protected without losing naturalness. On request and for specific applications, we also offer lacquering.
How do I attach the Oak 02 Wall Mirror?
The floating oak ledge is 50 cm long and is securely mounted on the wall using two screws. The mirror has a diameter of 50 cm and is designed to be inserted into the slot in the wood ledge. If you have any questions about mounting or if any questions arise in the process, please contact our technical support team at +49(0)5731 4962902.
What tools do I need to mount a wall mirror from the Oak collection of weld & co?
Please have the following tools ready for the mounting at a masonry wall:
– Spirit level
– pencil
– drill/accumulator screwdriver for stone/concrete walls
– 6 mm drill bit (Attention: Choose a drill bit that matches the wall material!)
– hammer
– Phillips screwdriver

Tip: Mount the wall mirror with the help of a second person.

Please have the following tools ready for the mounting at a lightweight wall:
– Spirit level
– pencil
– optional: drill/accumulator screwdriver

Tip: Mount the wall mirror with the help of a second person.

Detailed mounting instructions are included with each wall mirror.

I have moved and the mirror has been broken in the process. Is it possible to get a new mirror?
Yes, if the mirror is defective, we will be happy to send you a new one. Please contact us by e-mail or at +49 (0)5731 4962902.
What are the dimensions of the wooden ledge of the Oak 02 Wall Mirror?
The oak ledge is 50 cm long and 2,5 cm deep.
Can I order a weld & co Oak 02 Wall Mirror with my own choice of dimensions?
We are happy to manufacture custom Oak Wall Mirror for you. Please contact us by email or at +49 (0)5731 4962920 or use our form for customized production.

Additional information

Weight 2,05 kg
Dimensions 50 × 2,5 × 50 cm

Matching products

The most prominent product in the store, which was bought with the highest number - upsell

incl. VAT

plus Shipping costs

Oak 01 Wall Shelf

Oak 01 Wall Shelf
255,00 349,00 

incl. VAT

plus Shipping costs

Oak 01 Wall Shelf

Oak 01 Wall Shelf
255,00 349,00 

Notice:
When choosing the shelf size, please consider the material of the wall on which you wish to hang the shelf. Masonry walls are made of stone, concrete blocks, etc.; lightweight walls include drywall, sheet rock, gypsum board, and wood and wood-based panels. If you have any questions about mounting the shelves, please contact us.

255,00 349,00  incl. VAT plus Shipping costs Select options

incl. 19% VAT

plus Shipping costs

Oak 01 Key Holder

Oak 01 Key Holder
89,00 

incl. 19% VAT

plus Shipping costs

Oak 01 Key Holder

Oak 01 Key Holder
89,00 

89,00  incl. 19% VAT plus Shipping costs Add to cart

Sitzbank Eiche 01 von weld & co in Groesse L

incl. VAT

plus Shipping costs

Oak 01 Bench

Oak 01 Bench
925,00 1.115,00 
Sitzbank Eiche 01 von weld & co in Groesse L

incl. VAT

plus Shipping costs

Oak 01 Bench

Oak 01 Bench
925,00 1.115,00 

925,00 1.115,00  incl. VAT plus Shipping costs Select options

incl. VAT

plus Shipping costs

Oak 02 Wall Shelf

Oak 02 Wall Shelf
119,00 185,00 

incl. VAT

plus Shipping costs

Oak 02 Wall Shelf

Oak 02 Wall Shelf
119,00 185,00 

119,00 185,00  incl. VAT plus Shipping costs Select options